VS - Lighting Systems - Lighting - 998542

7. Headlamps beams

Initial aiming adjustment on the electrical actuator

7.6.3. Manual levelling On manual levelling systems the number of settings will be determined to ensure the low beam has a downward inclination in all loading conditions. The “0” position corresponds to the initial inclination, the following symbols are used to identify the controls. On electric or automatically controlled beam levelling system, the aiming angle is adjusted with a device that integrates a DC motor.

The initial aiming can also be setup by using these controllers.

or combination of

and

Cmd

0 1 2 3

LEFT

SETTING

Cmd

RIGHT

26