VSAO _ Clutch diagnostic folder_VF_EN[108]

RECOMMENDATIONS

INSTALLING A CLUTCH GENERAL RECOMMENDATIONS

4. ALWAYS REPLACE THE SCREWS when replacing the engine flywheel.

5. ALWAYS TIGHTEN (in a star pattern) to torque and, if necessary, to the specified angle (refer to the instructions).

Example on a VW Golf 4: 60 Nm + angle of 90°

6. TIGHTEN the mechanism TO A TORQUE of between 15 and25 Nm, depending on the model. 7. ALWAYS GREASE. Use the grease provided in the kit, if included (5 g recommended).

8. ALWAYS REPLACE THE HYDRAULIC RELEASE BEARING and bleed